Claira™ Non-Phthalate Ready For Use Colors are here and immediately available! These colors come in two series: EH – High Opacity and EL – HO Low Bleed. All are new, non-phthalate and best of all, they are affordable!

Claira™ NPT Non-Phthalate High Opacity Ink EH Series – EH is formulated as a press-ready plastisol for printing on 100% Cotton or over a low bleed underlay when printing on poly/cotton blends.

 EH Series Features:

• Short body and very low wet tack for easy printing with no build-up.

• Ready for use, just stir and print.

• Great for hand presses or automatic printing machines.

• Easy to use, maintains print viscosity without thinning during print run.

Non-Phthalate formulation to comply with new regulations restricting phthalates.

• Formulated to be opaque for direct printing on lights or darks.

• Competitive with lower opacity products currently sold in the print market.

EH Series Application:

Print EH NPT RFU inks directly onto 100% Cotton or over an NPT underlay on darks poly cotton garments. EH NPT RFU is normally printed through mesh ranges from 86—280 mc.in. (34—110 mc. CM.) Recommend 70-80 Durometer squeegee with sharp edge for maximum definition. Proper cure is achieved when garment reaches 320ºF (160°C.).

Claira™ NPT Non-Phthalate Low Bleed Ink

Description EL Series inks are formulated as a press-ready plastisol for printing on polyester and polyester/ cotton blends. They will provide good bleed resistance and brilliant colors when printed in the lower mesh range and used over a LB White underlay. We suggest using EL9746 NPT Super Poly White for Polyester fabrics and EL9074 NPT LB White for poly/cotton blends.

EL Series Features:

 Creamy and very low wet tack for easy printing.

 Ready for use, just stir and print.

 Great for hand presses or automatic printing machines.

 Easy to use, maintains print viscosity without thinning during print run.

 Non-Phthalate formulation to comply with new regulations restricting phthalates.

 Formulated to be opaque for direct printing on both lights or darks.

 Competitive with lower opacity products currently sold in the print market.

EL Series Application:

Print NPT HO LB inks onto polyester or polyester/cotton blends over an NPT underlay white for brilliant colors. Caution! Extremely bad bleeding polyester may require an under base of EL9746 Super Poly White or ES0266 Barrier Base for maximum bleed blocking. EL NPT HO LB ink is normally printed through mesh ranges from 86—200 mc.in. (34—78 mc. CM.) Recommend 70-80 Durometer squeegee with sharp edge for maximum definition. Proper cure is achieved when garment reaches 320ºF (160°C.). EL NPT RFU INKS ARE NOT DESIGNED FOR WET ON WET PRINTING. YOU SHOULD FLASH BETWEEN EACH COLOR.

RutlandColorCard